Amateur Radio M6CEC
Thanks for viewing these pages - you`ve either got here via a link off my main site www.raynerd.co.uk or you may have worked my station, M6CEC, on the amateur radio bands.
QTH is the village of Ramsbottom, 700ft above sea level near Bury, North Manchester, England.
Locators for my QTH are IARU: IO83UP & WAB: SD71
I am very interested in QSL cards and will be happy to send these to my contacts. I would very much like to receive contact QSL cards and these can be sent directly (details on www.qrz.com) or via the RSGB Bureau.
My Online Web-log can be viewed here or by using the link at the top of this page. Please note that although at times updates are “live” and immediate, there can often be a few days delay if I am not currently using the computer at the time.
My radios in the shack include:
* 2m - FT-480R for 2m FM and SSB work with a X200 colinear antenna.
* HF - FT-747GX, daiwa cnw-518 ATU and half size G5RV.
I hope you find some of my projects interesting and please find some time to post a message or comment regarding any of my projects - it is always good to see people are viewing my site!
All my projects links can be found in the menu to the left but I have highlighted those relating directly to radio below:
The Knole RX Kit Build: http://www.raynerd.co.uk/?p=514
Yagi 3 element 2m homebrew: http://www.raynerd.co.uk/?p=546
Projects
- Aluminium Fountain Pen (2)
- Bi-colour LED Blinker (1)
- Binary Clock (4)
- Boxford Model A Rebuild and Refurbish (1)
- Brassy Babe Engine (1)
- CNC Router Build (3)
- Converting ATX PC Power Supply (2)
- EasyPIC6 Dev Board (1)
- Elmers #25 Engine (1)
- First Homemade PCB - Binary Dice (1)
- Fountain Pens (17)
- Lathe Carriage Stop (1)
- LTD Stirling Engine (6)
- Mill 3-axis DRO (2)
- PCB UV LED Exposure Unit (2)
- PIC Binary Dice Code 12F675 (1)
- PIC Electronic Cup & Ball (2)
- PIC Electronic Dice (2)
- PIC Traffic Lights Code (1)
- Quick Indicating Tool for Late (1)
- Rocker Engine (1)
- Rotary Table CNC Conversion (6)
- Skeleton Clock (19)
- The Knole DC Receiver Kit Build (1)
- The Workshop & Tools (8)
- Three Phase Motor on Lathe (1)
- Thrust Bearings on Boxford (1)
- X-axis Power Feed and PIC controller (4)
- X2 Belt Drive Conversion (1)
- X2 Mill Repair (1)
- Yagi 3 ele VHF antenna (1)
Search
- Thrust Bearings for the Boxford - part 1
- Single Axis Stepper Controller - first run
- LTD Assembly - Part 6
- Quick Indicating Tool for lathe
- LTD Stirling Part5 - all parts complete
- 3 Phase Motor with Variable Speed Inverter Control.
- LTD Stirling Part 4 - Crank Assembled
- LTD Stirling Engine - part 3
- Boxford Re-build - saddle
- Boxford Strip Down and Re-build
- admin: Brian, sorry it is months since you posted this but never the less, I wanted to say thanks for stopping by. And, yes, I do border on obsessive when I
- CS: a place to learn draw a pcb? here's... http://www.youtube.com/watch?v=9_BzrDuDYgU
- admin: Hi Chris, thanks for looking at my site. Yep, it was good meeting you the other week. Sorry I didn`t see your reply until now. I`m slowly expanding my
Recent Comments